10
5. TALLY Output Port
Sends
Red
and
Green
tally signals to each channel.
Red
indicates On-Air, and
Green
indicates next camera
source. Tally output port can connect other Datavideo
peripheral devices such as ITC-100, ITC-200, AM-100 or
other monitor models, allowing the peripheral device to
communicate with the HS-1500T or send tally signal to be
displayed on the monitor.
6. Audio Input – XLR Balanced (CH1/CH2)
Two channels of XLR Balanced Audio Input.
7. Audio Input – Stereo RCA (Left/Right)
Connects unbalanced analog audio source (stereo).
Two Channels of unbalanced MIC input.
CH L CH R States
MIC1 MIC2 MIC 1(L) and MIC 2(R) are
respectively connected to left and
right channels.
MIC1 NC*
When MIC 1 is connected to the
left channel and MIC 2 is not
connected to the right channel, the
right channel switch will replicate
MIC 1 signal onto the right channel
thus both channels are MIC 1 input
signals.
NC*
MIC2 When no MIC signal is connected
to the left channel and only MIC 2
is connected to the right channel,
MIC 2 signal will not be replicated
onto the left channel which will
thus be grounded.
NC*
NC*
When no MIC is connected to the
two channels, the left channel
switch will ground the left channel
to prevent noise from being
generated.
*No Connection
