1
Simple Static IP Network Set Up
The easiest network set up is a single MP-1000 connected directly to a PC/Laptop running an XP
Professional 32 bit Operating System.
Please note
: this set up requires an Ethernet crossover cable with
RJ-45 connectors and this cable is not supplied with the MP-1000 unit. The RJ-45 cable supplied is a
straight through network patch lead and this can only be used with an existing network wall socket or router
socket.
1.
Set up your MP-1000 with a compatible monitor and, if required, active audio speakers.
2.
Connect the RJ-45 crossover cable between the PC/Laptop’s network port and the Ethernet port on the
MP-1000.
3.
Power on the MP-1000 and use the RMC-160 remote control to access the Main Menu on the MP-
1000.
4.
Choose SETUP and press the enter key.
5.
Choose Network and press the enter key.
6.
Use the Keyboard button on the RMC-160 to launch the on-screen keyboard.
7.
Using the arrow and enter keys on the RMC-160 remote select the letters and numbers required to
make up the username of the MP-1000 unit. Choose something unique. This name is limited to a length
of 8 characters. Use the 0 key (zero) on the RMC-160 remote control to delete an incorrectly typed
character.
8.
Once you are happy with the typed username press the Keyboard button again to exit the on-screen
keyboard.
9.
Move onto the password field using the arrow keys and use the Keyboard button on the RMC-160 to
launch the on-screen keyboard.
10.
Using the arrow and enter keys on the RMC-160 remote select the letters and numbers required to
make up the password of the MP-1000 unit. Choose something unique. This password is limited to a
length of 4 characters.
11.
Now press the enter key to move onto the server details page.
12.
Using the arrow keys on the RMC-160 remote highlight IP Address and then move down to type in the
digits of the Server IP address using the number keys. Enter the following numbers 192, move across
to the next octet and enter 168, move across again and enter 001, move across and enter 010. The
screen should show 192.168.1.10.
13.
Port Number – should already be 5021 as a default setting – leave this as it is.
14.
Now press the enter key to move onto the next page.
15.
Using the arrow keys on the RMC-160 remote highlight the Static IP option and then press the enter
key.
16.
Using the arrow keys on the RMC-160 remote move to type in the digits of the MP-1000 Device IP
address using the number keys. Enter the following numbers 192, move across to the next octet and
enter 168, move across again and enter 001, move across and enter 011. The screen should show
192.168.1.11.
17.
Using the same process as step 16 set the Subnet Mask as 255.255.255.0
18.
Using the same process set the DNS as 192.168.1.1
19.
Using the same process set the Gateway as 192.168.1.1
20.
Now press the enter key to go back to the SETUP menu. Move the highlight down through the menu
options to
Save and Reboot
and then press the enter key on the RMC-160 remote control.
