2
Next Browse your MP-1000’s Group playlist files and select your date range and weekday and click “Add”or
“Update” or ”Delete” for any highlighted file. And then save as a .sch file into the same Group folder.
There are two places that you can create this type of advanced schedule.
One is with MP-1000 Admin tools autoplay mode (AutoStart=Off in Setup)
The other is HTTP URL path (Auto Start= Http URL).
For the
first case
, MP-1000 tools autoplay mode (AutoStart=Off in Setup), you need to go in to Account
Management and browse to the required .sch file and enable Autoplay mode.
After demo.sch (above picture) is enabled, MP-1000 Admin Tools will read this .sch file and determine today’s
playlist file and send this to the MP-1000 client(s) when it(/they) logs into the MP-1000 Admin Tool on the
PC/Server. The MP-1000 client will then download the correct content and start playback.
For the
second case
, (Http URL), you need to use an FTP client tool to upload all your scheduling (.sch) and
playlist (.mpl) files to this Http URL folder. (example. http://192.168.1.60/1000 folder) Then use the MP-1000
Admin Tool to set the Http URL path into the MP-1000’s EEPROM chip. When the MP-1000 powers up, it will
download the demo.sch file first and then determine the current playlist file and download any required files.
Note:
For an MP-1000 to get today’s playlist file, you can set a daily reboot time in the MP-1000 Setup
Menu under
Setup -> Device -> Restart Time
. Example. When set to 06:30 the MP-1000 will reboot every
morning at 06:30 and then start with a new playlist file once any required files have been downloaded.