3
Front Panel, Rear Panel and Remote Control
Front Panel
1.
LED indicator
: LED light in Green color for POWER ON and Stand by status, and no light in
disconnecting DC in.
2.
IR receiver
: To receive the IR signal from MP-1000 remote control (RMC-160).
Rear Panel
1. Power
Switch:
Power ON/ OFF
2. DC plug in:
DC
12V,
0.5A
input
3. RS-232:
D-sub 9pin for data entry for group command
4. VGA
Output:
D-sub 15pin VGA connector output to PC Monitor
5. YUV
Output:
3 x BNC connectors for component YUV video signal output
6. CVBS
Output:
1 x BNC connector composite signal
7. S-Video
Output
:
1x 4-Pin mini DIN Plug connector for S-Video (Y/C) signal output
8. Audio output:
2x RCA connectors for Stereo unbalance audio outputs
9. RJ-45
(Ethernet
port)
: 100/10M base Ethernet Network interface
1
2
1
2
4
5
7
8
9
6
3