Data Video TP-300 Instruction Manual Download

Page: 19 / 23

Using the optional Bluetooth Remote Control

This remo

te is designed for use with Android™ and iOS/apple™ devices.

How to charge the Bluetooth remote control

It is always best to charge the remote for

at least

an hour before a prompting

session.

Plug the USB charging cable into a free USB A slot on your desktop computer and

connect the remote control to the charger cable.

When the remote is charging you will see a flashing red LED light

this will stop flashing once it is fully charged.

The

DV Prompter app

will display

RECHARGE

BATTERY

in the bottom right hand corner of the

application window when the battery is running low in the Bluetooth remote control.

How to pair the Bluetooth remote control

1. Ensure the Bluetooth remote has been charged fully beforehand.

2. Go in to the settings menu on your phone or tablet device.

3. Go to the Bluetooth settings and

turn Bluetooth On and ensure your device is visible.

Press and hold the green button on the remote for 1 to 2 seconds until the LED starts

flashing Green.

5. You should then see

DV Prompter

appear on the handset or tablet device when searching for

nearby Bluetooth devices.

6. Tap on the

DV Prompter

label to start the pairing process with the remote control.

7. The tablet or mobile device should recognise the remote as a Bluetooth keyboard type device.

If a message says that you are unsuccessful in pairing the devices then reset the remote.

To reset

the Bluetooth remote

press and hold the green button until the LED flashes red on the remote. Then

repeat the pairing process as above. Once paired for the first time the mobile device or tablet will then

remember the Bluetooth remote making later pairing attempts easier.

How to set up the App for the Bluetooth remote control

7. Open the

DV Prompter app

on the phone or tablet device and go in to

Settings

8. Scroll down to and tap the

Remote

option.

9. Select the

Bluetooth

option and your control is now ready to use.

10. Tap on the

back symbol



button to return to the

DV Prompter app

documents list.

11. Tap on the prompting document you wish to use.

12. Tap on the

Start Prompt

button.

Summary of Contents for TP-300
























Search results

Summary of Contents for TP-300

Reviews:

Related manuals for TP-300

Brands by name

Popular brands

Data Video TP-300, Instruction Manual

Search results

Summary of Contents for TP-300

Reviews:

Related manuals for TP-300

Brands by name

Popular brands