8 / 11
Panel Descriptions
IR Cables
IR Blaster
IR Receiver
IR Sockets
ET-HD0101-TC
IR Blaster
:
Plug in an IR blaster here to emit all IR command signals received from the IR receiver to
control the HDMI source device.
ET-HD0101-RC
IR Receiver
:
Plug in an IR receiver here to receive all IR command signals from the IR remote control of
the HDMI source device.
Definition of IR Earphone Jack
IR Blaster IR Receiver
1=IR signal (38KHz)
2=Grounding
.
You can buy any IR extension cables in the market that are compatible to the
definition of the IR sockets for the matrix if necessary for replacement use.
However, IR cables longer than 2m (6-ft) may not work.
1 2
1 2 3
1=Power
2=IR signal(38KHz)
3=Grounding
