background image

7

5 Trouble shooting and Safety info 

5.1 Trouble shooting 

5.2 Safety info 

The following items are suggestion for safety use, please pay more attention. 

Please do not disassemble the device by yourself.

Please do not put the device on the overheating or too humid place, avoid exposure
to direct sunlight. Too high temperature will damage the device or even cause the
battery explosion.

Please do not use Bolt 4GV on the airplane or near medical equipment.

FCC Caution. 

Trouble

 

Possible Reason

 

Solution

 

Messages can’t be 
reported to the 
backend server by 
Mobile network.

 

APN is wrong. Some 
APN can not visit the 
internet directly.   

Ask the network operator for the right 
APN.   

The IP address or port of 
the backend server is 
wrong.     

Make sure the IP address for the 
backend server is an identified address 
in the internet.   

Unable to power off 
Bolt 4GV.  

The function of power key 
was disabled by 
AT+GTFKS.   

Enable the function of power key by 
AT+GTFKS.   

Battery can not be 
charged 

The battery has not been 
used for too long time and 
has been locked. 

Using a external power source with 3.6V 
to 4.2V DC power supply to active the 
battery or apply for after sale help.   

Bolt 4GV can’t 
fix GPS 
successfully.   

The GPS signal is weak. 

Please move Bolt 4GV to a place with 
open sky.  
It is better to let the top surface face to 
the sky. (The same surface with 
indication LED)   

§ 15.19 Labelling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may 

cause undesired operation.

Summary of Contents for Bolt 4GV









Reviews: