CR805 Retransfer Card Printer User’s Guide
35
4.
Remove both used spools from the cartridge.
a.
Press the blue latch button and slide the
used supply spool out from the cartridge.
b.
Press the silver latch button and slide the
full take-up spool out from the cartridge.
c.
Follow your site’s guidelines to properly
discard the used ink ribbon.
5.
Clean the printer.
Each ink ribbon package contains an isopropanol-
coated cleaning card. We recommend that you
clean the printhead cam rollers and printer using
the double-sided, sticky cleaning card (ordered
separately) first, then use the isopropanol cleaning
card, if necessary.
for
complete information about the cleaning process.
6.
Remove the new ink ribbon from its package. Hold the ribbon cores and pull them up from
the package base.
Make sure that you clean the printer each time you install a new ink ribbon. We
recommend that you clean the printer after every 500 cards processed, or as
needed, so you may need to run a cleaning card between ribbon changes.
The package also includes a new cleaning sleeve. Refer to
.
a
b
Isopropanol
Cleaning Card
Ink Ribbon
Cleaning
Sleeve
Summary of Contents for CR805
