SR200 & SR300 Card Printers and LM200 & LM300 Laminators User’s Guide
61
IPv4
DHCP
ON
OFF
Dynamic
Host
Configuration
Protocol
(DHCP)
is
a
network
feature
that
assigns
IP
addresses
to
devices
on
the
network:
ON
uses
DHCP
to
assign
the
printer
IP
address.
The
IP
address
can
change
when
you
power
off
the
printer
and
then
power
it
on
again.
OFF
means
that
you
must
assign
the
IP
address
of
the
printer
and
it
will
not
change
(static
IP).
Use
this
setting
if
your
network
does
not
support
DHCP.
Ask
your
network
administrator
which
setting
to
use.
Setting:
IP
Address
The
default
IP
address
of
the
printer
is
192.168.0.141,
and
is
displayed
when
the
printer
is
powered
on
for
the
first
time
or
when
DHCP
is
set
to
On.
If
you
do
not
use
DHCP,
ask
your
network
administrator
for
the
IP
address
to
use.
Subnet
Mask
The
default
subnet
mask
of
the
printer
is
255.255.255.0.
If
you
do
not
use
DHCP,
ask
your
network
administrator
for
the
subnet
mask.
Gateway
The
default
gateway
of
the
printer
is
192.168.0.1.
If
you
do
not
use
DHCP,
ask
your
network
administrator
for
the
subnet
mask.
Effective
IP
The
IP
address
the
printer
uses.
IPv6
Adrs
Config
Auto
Manual
Method
to
set
the
IP
address
if
the
network
uses
IPv6.
Setting:
IP
Address
The
printer
does
not
have
an
default
IPv6
IP
address.
If
Adrs
Config
is
set
to
Auto
and
the
printer
is
not
connected
to
a
network,
None
is
displayed.
Prefix
Len
The
default
prefix
length
is
64.
Menu
Display
Settings
Function
