SR200 & SR300 Card Printers and LM200 & LM300 Laminators User’s Guide
79
Preparing the Printer and Laminator for Transport
Use
saved
packaging
materials
to
prepare
the
printer
and
laminator
for
transport.
Transport
includes
moving
the
printer
from
one
location
to
another
within
the
same
facility.
1.
Open
the
door
to
the
printer.
The
Door
Open
error
message
is
displayed.
2.
Remove
the
printer
ink
ribbon
cartridge
and
remove
the
ink
ribbon
from
the
cartridge.
Replace
the
empty
cartridge
into
the
printer.
3.
Remove
the
retransfer
film
cartridge
and
remove
the
retransfer
film
from
the
cartridge.
Replace
the
empty
cartridge
into
the
printer.
4.
If
there
is
a
laminator,
open
the
laminator
door
and
remove
the
top
and
bottom
laminate
cartridges.
Remove
the
patch
or
topcoat
material
and
replace
the
empty
cartridges
into
the
laminator.
5.
Close
the
doors
to
the
printer
and
laminator.
Press
the
Reset
key.
6.
The
Initialize
OK?
message
displays.
Press
the
key.
7.
The
Film
Search
error
message
is
displayed.
8.
Set
the
printer
to
transport
mode
using
the
LCD
panel.
Refer
to
“Transport
Mode”
on
page 55
for
instructions.
9.
Power
off
the
printer
and
laminator.
10.
Disconnect
the
power
and
data
cables
from
the
printer
and
laminator.
11.
Remove
cards
from
the
hopper.
12.
Remove
the
output
stacker.
13.
Allow
the
unit
to
cool
down
before
packaging
it
for
transport.
14.
Package
the
printer
and
laminator
in
their
original
shipping
cartons.
When
the
printer
is
not
in
use,
power
it
off
and
cover
the
printer
with
the
plastic
shipping
bag
to
keep
dust
and
other
debris
out
of
the
printer.
