36
XPS Card Printer Driver Installation
m.
Disable SNMP for each added printer.
i.
On the
Ports
tab, select a printer that you want to add to the pool and click
Configure
Port
.
ii.
On the
Configure Standard TCP/IP Port Monitor
window, make sure that SNMP
Status Enabled is not checked.
iii.
Click
OK
to close the Configure Standard TCP/IP Port Monitor window.
iv.
Select the next printer that you want to add to the pool and repeat steps i through iii.
n.
Click
Apply
on the
Ports
tab after all printers and ports have been added and configured.
Windows Server 2008 and Windows Server 2012:
Close the
Print Server Properties
window.
5.
Enable printer pooling.
a.
On the
Devices and Printers
window, right- click the printer icon
and select
Printer properties
.
b.
Select the
Ports
tab. The list of
printer ports displays.
c.
Select the Port check box for the
printer that you want to represent
the pool. (This is the printer that
users select when printing to the
pool.)
d.
Select
Enable printer pooling
.
e.
Select the Port check box next to each port that you added and that you want to be part
of the printer pool.
f.
Click
Apply
to save the settings.
6.
Click
OK
to close the
Printer Properties
window.
Summary of Contents for SD460
