6
English
11.
Bring the battery to the shop from which it was
purchased as soon as the post-charging battery
life becomes too short for practical use. Do not
dispose of the exhausted battery.
12.
Wear ear protections
Exposure to noise can cause hearing loss.
13.
Do not touch the bit during or immediately after
operation. The bit becomes very hot during
operation and could cause serious burns.
14.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
15.
Always hold the body handle and side handle of
the power tool firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
SPECIFICATIONS
POWER TOOL
Model
L210116
No-load speed Save/Power
0 – 500 min
–1
/ 0 – 1000 min
–1
Full-load impact rate Save/Power
0 – 2200 min
–1
/ 0 – 4500 min
–1
Concrete
24 mm
Capacity
Drilling
Steel
13 mm
Wood
30 mm
Driving
Wood screw
6.2 mm (diameter)
×
40 mm (length)
Rechargeable battery
EB2433X: Ni-MH 24 V (3.3 Ah 20 cells)
Weight
4.0 kg
䡬
Do not use the “SAVE“ mode when boring holes with the wood drill. There is a likelihood that the motor
will burn out.
CHARGER
Model
UC24YFB
Charging voltage
24 V
Weight
0.6 kg
STANDARD ACCESSORIES
Standard accessories are subject to change without notice.
L210116 (2XFK)
1
Side handle ...................................................................................................................... 1
2
Depth gauge .................................................................................................................... 1
3
Charger .............................................................................................................................. 1
4
Plastic case ....................................................................................................................... 1
5
Extra battery .................................................................................................................... 1
1
2
3
4
5
