34
•
Programs
Ahiba IR Pro User's Guide
Creating a Program
Below are the steps for creating a new program:
1.
From the
System Idle
screen, press the Directory
button. Select the
local memory. The Program Directory screen displays.
2.
Select an empty memory location “…” and the line will highlight. Next press
the program edit icon
. An automatic program name is assigned
“NEWP#”. If you wish to change it, press and highlight the “name” area and
a keyboard will display and a different program name can be assigned. If
enter is pressed your program name will save.
3.
After assigning a program name press the enter
icon. The below screen
is displayed and known as the program edit screen.
4.
The screen above shows all the data that can be entered for a single step.
Default values are already assigned for certain areas. To gain access to an
area simply touch the area and it will highlight and a numeric keypad will
display so data can be entered. Pressing enter will save that data.
Temperature
control icon. Provides control to the
temperature input line.
Gradient
control icon. Provides control to the
gradient input line.
Time
control icon. Provides control to the time input
line.
Motor Speed
control icon. Provides control to the
rotational speed input line.
Reversing
icon. Provides control to allow the beaker
wheel direction to be changed at preset intervals.
Hold
control icon. Provides control to HOLD input
line. Also used to put the unit into manual hold.
5.
After all step data is entered press the new step
icon to enter additional
steps (you may enter up to 15). Data from the previous step is automatically
written into the new step so you only need to edit the area that needs
changing. After all steps are entered press
to save your program.
