Ahiba IR User's Guide
Ahiba IR
•
5
INFORMATION
A unit can be equipped with either dosing or non-dosing beakers. Injection dosing
or membrane dosing beakers are available.
Units equipped with a 5L drum should limit the heating gradient input to 2.5°C/min,
this due to the mass of the beaker and to prevent “Temperature out of Range” errors.
A unit fitted with either dosing option will include all accessories required to
accomplish the dosing (e.g. 10cc self-refilling dosing syringe, dosing adapter or
needle pack).
The ideal sample size is based on 10:1 liquor ratio. The maximum fill volume of the
beaker should be limited to less than 2/3 of the total beaker volume, to achieve
maximum agitation of the sample and dyebath inside the beaker.
The number of beakers supplied is based on the number of dyeing positions ordered
with the unit.
See also Appendix, Optional Accessories in this guide for a complete list of optional
accessories.
Safety Labels and Precautions
The following symbols are found on the equipment and in the documentation:
Do Not Touch
Surface is Hot.
There is a danger of burn injuries in
the operation of this unit.
High Voltage
Hot Air Exhaust
Stop.
Warning that a specific action is prohibited.
CAUTION.
When this appears in the documentation,
it indicates that the step to be performed requires
precautions.
