Initial Configuration
24
© 2010 Datacom Systems Inc
DURA
stream
™
<variable>
description
<option>
force
configure force (debug) mode for each I/O unit:
default is 0. Force (debug) mode is disabled.
Setting option to value 2 will force segment to Active
switch mode.
Setting option to value 4 will force segment to Bypass
Switch mode.
default: 0
gw
gateway ip address.
default: 192.168.0.1
hb_mode
configure the heartbeat mode for DS-1010 bypass unit:
hb_mode 1, system is generating the heartbeat.
hb_mode 3, the system activates bypass depending
on link detection on the appliance side.
default: 1
host
hostname for DS-1010.
default: datacom
https
https server allows:
a value 0 disables the secure WEB Management
interface.
a value 1 enables access to secure WEB Management
interface.
default: 1
ip
static IP address for Management Port.
default: 192.168.0.111
lfd
1 – enabled, the system will detect and activate the lfd
0 – disabled, the system will not detect lfd
default: 1
mac
shows mac address for the Management Ethernet Port.
read only
mask
subnet mask for Management Port.
default: 255.255.255.0
ntp
ntp service is enabled
0 = disable,
1 = enable
op_mode
configure default operation mode for DS-1010 bypass
unit:
0 – Normal Active Bypass. If the heartbeat is
received the system will be inline.
1 – Normal Active Inline. If the heartbeat is received
the system will be in bypass.
2 – Manual Active Inline.
4 – Manual Active Bypass.
5 – Manual Passive Bypass. The bypass switch will
be closed, in bypass mode.
default: 0
password
administrator password.
default: admin