Chapter 6
Printing/Uploading Test Results
Page 6-7
CHANGING SERIAL PORT SETTINGS
You can change the serial port
settings for these selections:
• BAUD rate
• Flow control
• Output report format
The serial data format is fixed at 8-bit, no parity, 1 stop bit (8N1).
1.
Press BAUD (F1) to increment from 1200 to 38400 baud.
2.
Press FLOW (F2) to select flow control
a. XON/XOFF (software)
b. HARDWARE (CTS/DTR)
c. NONE (for no flow control).
3.
Press FORMAT (F3) to select the output format and choose
from the following:
a. TEXT (F3) for a pre-formatted report ready for printing.
b. COMMA (F3) for comma separated variables (CSV)
suitable for uploading to a computer and importing to a
database or spreadsheet.
4.
Press PRINT (F4) to begin print/upload.
5.
To abort a report print out, press ESC.
NOTE
Serial port setting changes are automatically stored
in non-volatile memory.
F1
F2
F3
F4
Print Screen
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com