LANcat
User Manual
Page 8-4
FAULT THRESHOLD
Fault Threshold is the minimum reflection level detected as an
anomaly in the Length test. Any reflection less than this threshold
will be ignored by the LANcat.
The default Fault Threshold value is 7%, which corresponds to the
worst-case allowable impedance discontinuity specified in IEEE
802.3 for coaxial cable. Anomalies that are greater than this
threshold may impair network transmission.
F1
F2
F3
F4
• Switch dial to SETUP.
• Highlight Fault Thresh using
the arrow keys.
• Press DEFAULT (F1) to
change to the factory default
value.
• Press DEC (F2) to decrease
the fault threshold.
• Press INC (F3) to increase the
fault threshold.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com