Chapter 1
Introduction
Page 1-9
Battery Information
The LANcat handheld is shipped with eight AA alkaline batteries.
The Remote Unit is shipped with four AA alkaline batteries.
An optional rechargeable nickel metal hydride (NiMH) battery
pack may be ordered for the LANcat handheld.
A low battery message displays on the LCD screen when it is time
to replace the batteries. When the low battery message appears, you
have 60 seconds to save your test results before power-down
occurs.
MEMORY STORAGE
The LANcat memory is powered from an internal, long-life lithium
cell. Stored test results and set up conditions will therefore be
saved when you replace the AA alkaline batteries or rechargeable
battery pack.
CHARGING MODE
When the AC/mains adapter is used and the LANcat is powered
“off”, the unit goes into a “sleep mode.” With the optional NiMH
rechargeable battery pack installed, the unit goes into a Recharge
mode. A fully discharged battery pack will take approximately 10-
12 hours to charge to full capacity. To resume testing, press the
Power button.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
