Chapter 2
Getting Started
Page 2-9
Selecting a Cable Test Standard
The Cable Test Standard used by the LANcat to certify cables may
be changed any time
appears next to the cable name.
To select a different cable test standard:
1.
Set dial to Autotest, Quick
, Wire Map, Length or Traffic.
2.
Press either arrow key to display the cable standard library and
select a different cable test standard.
3.
When the desired cable test standard is highlighted, press
SELECT (F4) or ENTER. The LANcat immediately begins
testing using the new cable test standard.
NOTE
Refer to Appendix A, Test Standards, for assistance in
choosing an appropriate cable test standard.
When using a TwoWay System, cable standards are
compared at both ends. If they differ, the standard on the
Remote end will automatically be changed to match that of
the Main end.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
