Chapter 6: Servicing the EF2915 Series System
Removing and Replacing Processor Modules
EF2915 Series User Guide
73
Figure 6-5. Removing an SP22x Processor Module
To remove a SP28x processor module:
1
Make sure all of the cables are clearly marked to indicate which connector on the stor-
age processor they plug into.
2
Unscrew the two screws (
Figure 6-6
top).
3
Carefully pull the board from the chassis (
Figure 6-6
bottom). This disengages the
SP28x processor module from the mid-plane board.
!
Caution:
Slide the board out evenly. It connects to the mid-plane by two connectors.
4
Slide the board away from the system.
Note:
Do not remove the backplane from the SP28x processor module. Replacement
units have the backplane attached.
