Manual Datafox PZE-MasterIV Basic
4.4.5.1 Functions for device maintenance
Read out serial number
Read out firmware version
Compare clock with system time
Transmit device file (firmware update) - Via the button
1
in figure
a dialogue opens
where you can select the device file with the extension "‘.hex"’. When you have marked
the file, you can take it over via the button "‘Open"’.
Transmit setup file - Via the button
2
in figure
a dialogue opens where you can
select the setup file with the extension "‘.aes"’. When you have marked the file, you
can take it over via the button "‘Open"’.
Transmit setup file with lists - Via the button
3
in figure
a dialogue opens where
you can define the folder (path) that contains the list files.
Transmit lists matching to the given setup file - Only the list data of the button (
3
)
are transmitted here.
Transmit access lists matching to the given setup file - Here the access lists have to be
assigned to the button (
3
)
read out data records - Via this function you can read out data records from the PZE-
MasterIV Basic. Via the button
4
in figure
a dialogue opens where you can define
the folder (path) in which you want to save the data records.
Read GPRS configuration data - Via the button (
5
) a dialogue opens where you can
define the GPRS.ini. Just create a new file, name it GPRS.ini and select it. Now, the
current GPRS configuration is read from the device and written into the *.ini file.
Write GPRS configuration data - Select the configuration file (GPRS.ini) that contains
the desired settings via the button (
5
).
Read/ write system variables for signal processing - A selection dialogue opens where
you can select the desired system variables of the digital inputs and then read or write
them. See chapter
Import and load Timeboy lists - The dialogue "‘Import and transmit data of the lists
of the Timeboy"’ opens. See chapter
Read StartUp variables - Via this function you can read out the StartUp variables.
Write StartUp variables - Via this function you can write StartUp variables.
Checking for data records - It is examined whether there are data records in the device.
Delete all existing data records - Deletes all data records from the device. This is
absolutely necessary before you can install a new firmware or setup.
Read data record (not delete) - reads a selected data record without deleting it
Read data record (is deleted!) - reads a selected data record and then deletes it
Switch over communication (GSM, GSM/GPRS)
Note:
In order to carry out the functions "‘Transmit device file"’ and "‘Transmit setup
file"’, no data records must be on the device. In this case you first have to read out
all data from the device (see chapter
).
4.4.6 Edit text data of the firmware
From version 04.01.06. x you can edit the text data of the device firmware about DatafoxStudioIV. Open
the edit dialogue about the menu
Setup
T extdaten der F irmware bearbeiten
. Open now an
Version: 04.01.07.00
Page
44
www.datafox.de
