16
WWW.RAPIDRH.COM
WAGNER METERS
1. Carefully pry open the battery compartment cover
with a small flat head screwdriver or similar device.
2. Use a paper clip or similar implement to push
through one of the holes on the back to coax the
battery out.
3. Place the battery (Replaceable CR1025) within the
well positive side up (the text should be readable).
Insert the battery until it stops. Be careful to avoid
using excessive force.
4. Replace the battery compartment cover by guiding
the arms of the cover inside the slot and pushing
until the cover snaps into place.
1
2
DataGrabber
Removing and Replacing the Battery