15
16
REMOVAL
To remove the DataGrabber, use the included removal tool
as shown to carefully extract DataGrabber without damaging
the unit.
1
2
RAPID RH L6
WAGNER METERS
BATTERY
Removing and Replacing the Battery
1. Carefully pry open the battery compartment cover with a
small flat head screwdriver or similar device.
2. Use a paper clip or similar implement to push through one
of the holes on the back to coax the battery out.
3. Place the battery within the well positive side up (the text
should be readable). Insert the battery until it stops. Be
careful to avoid using excessive force.
4. Replace the battery compartment cover by guiding the
arms of the cover inside the slot and pushing until the
cover snaps into place.
Product Specification
• Battery Life:
6.71 years (Replaceable CR1025)
• Storage:
512 data points
• Dimensions:
.79” (20.2mm) Height .71” (18.12mm) Diameter
• Net Weight:
.12 oz (3.3g)
1
2
Summary of Contents for RapidRH L6 with Bluetooth
Page 1: ......
