Wagner Meters provides two distinct DataGrabbers
®
which
will significantly enhance your documentation of Rapid RH
®
L6 Smart Sensor readings. DataGrabbers automate the reading
collection process by interfacing to an L6 sensor, allowing the
sensor itself to store relative humidity (RH) and temperature
readings on a periodic basis while you are away from the
job site. The DataGrabber with Bluetooth
®
features a built-
in wireless connection to your smart device. Alternatively,
the non-wireless version of the DataGrabber uses the
Bluetooth
®
-enabled Total Reader
®
to communicate to your
smart device.
The DataGrabber with Bluetooth easily inserts into an L6
sensor and directly connects with the free DataMaster
™
L6 app for automated collection of time and date-stamped
concrete RH and temperature readings. The DataMaster
L6 app allows you to configure the time interval that the
DataGrabber with Bluetooth will periodically engage the L6
Smart Sensor to collect and store readings, keep a running
clock of acclimation time, download the time and date-
stamped readings and much more.
The non-wireless DataGrabber performs the same automated
and data gathering tasks as the DataGrabber with Bluetooth
but, as mentioned above, requires the Total Reader as the
Bluetooth conduit to the DataMaster L6 app.
By using a DataGrabber to enable an L6 sensor to store up to
512 RH and temperature readings on a time and date-stamped
basis, you can achieve a better understanding of the drying
process as well as the dynamics that may be affecting the
concrete drying time. Utilizing RH and temperature readings
acquired from an L6 sensor with a DataGrabber, data analysis
and trending is also possible in the DataMaster L6 app.
TABLE OF CONTENTS
DataGrabber
®
with Bluetooth
®
1
Connect
3
Configuration
4
Troubleshooting
6
Removal
7
Battery
8
DataGrabber
®
9
Data Collection
11
Configuration
12
Removal
15
Battery
16
Summary of Contents for RapidRH L6 with Bluetooth
Page 1: ......
