DATAGRABBER RapidRH L6 with Bluetooth Instruction Manual Download

Page: 6 / 11

REMOVAL

To remove the DataGrabber with Bluetooth, use the included

removal tool as shown to carefully extract without damaging

the unit.

RAPID RH L6

WAGNER METERS

BATTERY

Removing and Replacing the Battery

1. Carefully remove the screws near the top with a small

Phillips head screwdriver.

2. Tip the DataGrabber with Bluetooth upside down and tap

the bottom of the unit carefully to dislodge the battery into

your palm.

3. Place the battery within the well positive side up. (Note:

the battery text should be visible.)

4. Insert the battery until it stops. Be careful to avoid using

excessive force.

Product Specification

• (Replaceable) Battery Life:

1.88 years (CR 1/3N)

• Storage:

512 data points

• Dimensions:

1” (25.4mm) Height .71” (18.12mm) Diameter

• Net Weight:

.19oz (5.7g)

Summary of Contents for RapidRH L6 with Bluetooth












Search results

Summary of Contents for RapidRH L6 with Bluetooth

Reviews:

Related manuals for RapidRH L6 with Bluetooth

Brands by name

Popular brands

DATAGRABBER RapidRH L6 with Bluetooth, Instruction Manual

Search results

Summary of Contents for RapidRH L6 with Bluetooth

Reviews:

Related manuals for RapidRH L6 with Bluetooth

Brands by name

Popular brands