DKG-119J User Manual V-32
(09.07.2012)
- 7 -
The unit has 5
LEDs, divided in 2 groups:
-Group_1:
Operating mode: This group indicates the genset function.
-Group_2:
Warnings and alarms: This group indicates the existence of abnormal conditions
encountered during operation.
Function
Color
Description
RUN
Yellow
It turns on when the related operation mode is
selected. One of these LEDs is always on and
indicates which operation mode is selected.
If the operation of the genset is disabled by the
weekly operation schedule
, then the
AUTO
led will
flash.
OFF
Yellow
AUTO
Yellow
ALARM
Red
If a fault condition resulting to the engine shutdown
has occurred , the alarm led turns on steadily. If a
warning condition occurs, this led will flash. Alarms
work on a first occurring basis. The occurrence of a
fault will disable other faults of lower or equal priority.
SERVICE REQUEST
Red
Engine periodic maintenance request indicator. It
turns on when the preset engine hours or time
duration after previous service has elapsed.
The unit is able to display information in 3 languages. Language selection is made through
program parameter CONTROLLER CONFIGURATION > LANGUAGE SELECTION. Below selections
are available:
0: English language
1: Turkish language (spanish language on some models)
2: Chinese language
3: ask selection at power-up
If language is set to 3, below screen will come at power on:
Left / Up / Down arrow pushbuttons will select the screen language. The language will be asked
everytime power is turned on.
With language selections of 0,1,2 this screen will not appear and the selected language is
enabled.
3.2 Language Selection
3.1 Led Displays
3. DISPLAYS
