DPR-400 User Manual Rev_01 Firmware V-1.0
- 39 -
The programming mode is organized into a 2-level menu system. Main menu is composed of program
groups. Program parameters are located within the groups.
Upon entering the programming mode, the list of program groups are displayed. Navigation between groups
is done using
and
buttons. The selected groups is highlighted in blue with a blue arrow to its left. To
enter the group, press
button. To go back to the main menu from the group, press
button.
Within the group,
and
buttons are used to navigate between program parameters. Valid parameters
are listed on the screen. The selected parameter is highlighted in blue with a blue arrow to its left. To view
/ change the value of this parameter, press
button. The parameter value is increased / decreased with
and
buttons. The parameter value is saved to memory once it has been modified.
button moves
to the next parameter.
11.2. NAVIGATING BETWEEN MENUS
11.3. MODIFYING PARAMETER VALUE
Next group
Previous
group
Enter the
group
Exit
Decrease
parameter
value
Increase
parameter
value
Exit
Next
parameter
