DataLocker DL3 Setup Manual Download

Page: 1 / 2

Connect the DL3/DL3FE with RFID, enter the

“Admin” passcode and select “Setup”.

Select the “System” option then select the

“Arrow” icon to move to the next screen.

Select the “RFID” option and select “On” to

enable RFID.

Select the “Add RFID Tag” option.

RFID Setup Guide

Swipe the RFID tag at the bottom right corner

of the device until you hear a beep.

Record the Tag ID in case the physical tag is

lost.

Select the back arrow until you get back to the

“Connect” screen. Select “Connect” to save.

Video Setup Guide

Youtube.com/datalocker

Your settings have been saved and your RFID is

setup and ready for use.

DL3FE with RFID

Summary of Contents for DL3

Page 1: ...RFID Select the Add RFID Tag option RFID Setup Guide Swipe the RFID tag at the bottom right corner of the device until you hear a beep 5 6 Record the Tag ID in case the physical tag is lost Select th...

Page 2: ...ID Tag ID Record your 20 character RFID Tag ID Two characters per space This Tag ID can be manually entered on the device in the event you lose your RFID tag Tag ID 1 Date Tag ID 2 Date Tag ID 3 Date...

Brands by name