DL4 FE Encrypted External Hard Drive - v1.49/6.5.0 - User Guide
Touch Sounds
The DL4 touch sounds are enabled by default.
To disable these sounds, follow these steps:
1. Tap the
Touch Sounds
feature from the administrator menu.
2. Tap the
Disable
button.
3. Tap
Back
from the upper left to save and exit to the administrator menu.
Brightness
Your DL4 screen brightness can be adjusted via this feature. The default value is 10.
To change the value, follow these steps:
1. Tap the
Brightness
option from the administrator menu
2. Tap
(+)
to increase the brightness and
(-)
to decrease the brightness.
NOTE:
The minimum brightness value can be 1 and maximum is 30.
3. Tap
Back
from the upper left to save and exit to the administrator menu.
Read-Only Mode
Administrators can select the
Read-Only Mode
to globally enforce the DL4 to always unlock in
read-only mode. Enabling this option will also enforce read-only access for the User profile (if the
user profile is enabled). Once the
Read-Only Mode
is enabled, data can only be read from the
DL4 and no data can be written or modified.
To enable
Read-Only Mode
, follow these steps:
1. Tap the
Read-Only Mode
feature from the administrator menu.
2. Tap
Enable
.
3. Tap
Back
from the upper left to save and exit to the administrator menu.
NOTE:
The administrator and the user can each set Read-Only Mode for a single login by tapping
Read-Only Mode after entering the password. The
Read-Only Mode
will enforce this functionality
for every login.
Language
A total of 4 languages can be selected. The selected language will be used for all on board menu
prompts. The available languages are:
- English
- French
- German
- Spanish
To set a preferred language, follow these steps:
© 2021 DataLocker Inc. All rights reserved.
26
