DL4 FE Encrypted External Hard Drive - v1.49/6.5.0 - User Guide
Touch Sounds
The DL4 touch sounds are enabled by default.
To disable these sounds, follow these steps:
1. Tap the
Touch Sounds
feature from the user menu.
2. Tap the
Disable
button.
3. Tap
Back
from the upper left to save and exit to the user menu.
Brightness
Your DL4 screen brightness can be adjusted via this feature. The default value is 10.
To change the value, follow these steps:
1. Tap the
Brightness
option from the user menu.
2. Tap
(+)
to increase the brightness and
(-)
to decrease the brightness.
NOTE:
The minimum brightness value can be 1 and maximum is 30.
3. Tap
Back
from the upper left to save and exit to the user menu.
Language
A total of 4 languages can be selected. The selected language will be used for all on board menu
prompts. The available languages are:
- English
- French
- German
- Spanish
To set a preferred language, follow these steps:
1. Tap the
Language
option from the user menu.
2. Tap your desired language.
3. Tap
Back
from the upper left to save and exit to the user menu.
NOTE:
The administrator and user both can select their own preferred language from their respec-
tive menus.
SilentKill Code
A SilentKill code can be set up by the DL4 administrator. This code can be entered during the
login process instead of the password. When this code is entered, the encryption keys, adminis-
trator/user password(s), and any data on the device is deleted. The SilentKill code then becomes
the DL4 administrator password.
NOTE:
The device must be reformatted once the SilentKill action occurs.
© 2021 DataLocker Inc. All rights reserved.
29
