DL4 FE Encrypted External Hard Drive - v1.49/6.5.0 - User Guide
Generating a SilentKill Code
1. Enter the administrator password and navigate to the administrator menu. See
the Onboard Administrator or User Menu
2. Tap and hold the
Change Password
option for 5 seconds and then release.
NOTE:
Upon release, the device will display a message. “Silent Kill Code -This code is used to
immediately initiate the self destruct process”.
3. Tap
OK
.
4. Set a Silent Kill Code by entering a desired password.
5. Confirm the code by re-entering the password.
6. The device returns to the administrator menu upon completion.
Registering Your DL4 to SafeConsole
Before registering your drive to SafeConsole, make sure SafeConsole is enabled on your DL4. For
more information, see
. The registration process will begin by allowing the
device to communicate with the SafeConsole server. The steps needed to register a DL4 to Safe-
Console will depend on the policies that your SafeConsole administrator is enforcing. Not all op-
tions will be shown.
A SafeConsole Connection Token will be needed. The SafeConsole Connection Token is obtained
by the SafeConsole administrator through the Quick Connect Guide and is usually sent via email.
Users without access to a Management Server, please contact sales:
/
+1(913)310-9088
1. Plug in and log into your DL4. Tap the
Connect
button. Your DL4 will show a “Waiting. . . ”
prompt.
2. On your computer, double-click the “Unlocker” CD drive under “Devices and Drives”.
© 2021 DataLocker Inc. All rights reserved.
30
