Sentry K300 SafeConsole Deployment guide
be turned off without contacting (
). Caution should be exercised,
making sure SafeConsole is needed before making this selection.
4. If the Sentry K300 was previously configured with both an admin and user password, the user
password will be disabled after clicking
Update. . .
. This means that the End User will need to
use the admin password to unlock the device.
5. After the update is successful, the K300 will shut down. If the K300 does not turn back on after
30 seconds, press the power button on the device for roughly 3 seconds. The K300 can now
be given to the End User to register to SafeConsole. If the password for the device is still the
default of
1234567
, the user will be forced to change the password on the device’s 4th unlock
after initialization.
Option 2: Enable SafeConsole From The Sentry K300 Device Menu
These steps can be used to enable SafeConsole if the Sentry K300 is already on firmware version 1.19
or greater, either directly from the factory, or after performing a device update without selecting
Enable SafeConsole
. These steps can also be performed by the End User.
1. Authenticate on the K300 keypad using the admin password, default
1234567
.
2. In the Connection menu, select
MENU
.
3. In the main menu select
SAFECONSOLE
.
4. In the SafeConsole Menu select
ENABLE
.
5. Return back to the connection menu.
Note: Enabling SafeConsole directly in the device menu will lock the K300 into SafeConsole mode
after registration is complete.
© 2018 DataLocker Inc. All rights reserved.
4
