Datalogic CATCHER D531 Series, Quick Reference

CATCHER™ D531 SERIES 

DEFAULT VALUES 

USB DEFAULT SETTINGS 

DATA FORMAT

: code identifier disabled, no field adjustment, code length not 

transmitted, character replacement disabled. 

USB KEYBOARD

: USA keyboard, inter-character and inter-code delays disabled, 

control character emulation = ctrl+shift+key. 

USB COM

: no handshaking, delay disabled, rx timeout 5 sec., ack/nack disabled, 

serial decode control = disabled, serial sleep control = disabled. 
 
Default Headers and Terminators for each USB mode: 

- 

USB-KBD: no header, terminator = ENTER 

- 

USB-KBD APPLE: no header, terminator = ENTER 

- 

USB-KBD-ALT-MODE: no header, terminator = CR 

- 

USB-COM: no header, terminator = CR-LF 

- 

USB-IBM-TABLE TOP: not applicable 

- 

USB-IBM-HAND HELD: not applicable 

RS232 Standard DEFAULT SETTINGS 

9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx 
timeout 5 sec., ack/nack disabled, serial decode control = disabled, serial sleep 
control = disabled. 

DATA FORMAT

: code identifier disabled, no field adjustment, code length not 

transmitted, 

no header

, 

terminator = CR-LF

, character replacement disabled. 

RS232 Nixdorf DEFAULT SETTINGS 

9600 baud, parity odd, 8 data bits, 1 stop bit, handshaking hardware 
(RTS/CTS), delay disabled, rx timeout 9.9 sec., ack/nack disabled, serial 
decode control = disabled, serial sleep control = disabled. 

DATA FORMAT

: code identifier enabled, no field adjustment, code length not 

transmitted, 

no header

, 

terminator = CR

, character replacement disabled. 

RS232 Fujitsu DEFAULT SETTINGS 

9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx 
timeout 2 sec., ack/nack disabled, serial decode control = disabled, serial sleep 
control = disabled. 

DATA FORMAT

: code identifier enabled, no field adjustment, code length not 

transmitted, 

no header

, 

terminator = CR

, character replacement disabled. 

RS232 ICL DEFAULT SETTINGS 

9600 baud, parity even, 8 data bits, 1 stop bit, handshaking RTS always on, 
delay disabled, rx timeout 9.9 sec., ack/nack disabled, serial decode control = 
disabled, serial sleep control = disabled. 

DATA FORMAT

: code identifier enabled, no field adjustment, code length not 

transmitted, 

no header

, 

terminator = CR

, character replacement disabled. 

WEDGE DEFAULT SETTINGS 

USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock 
unchanged, inter-character and inter-code delays disabled, control character 
emulation = ctrl+shift+key. 

DATA FORMAT

: code identifier disabled, no field adjustment, code length not 

transmitted, 

no header

, 

terminator = ENTER

, character replacement disabled. 

15