CATCHER™ D531 SERIES
CONNECTIONS
NOTE
The scanner and the host system must be switched off before
starting the installation of the scanner. By following this
precaution you prevent any electrical damage.
You are advised to install the scanner in a place with good air
circulation out of direct sunlight.
In order to install the scanner:
1.
Locate the optimal scanner position in relation to the counter surface.
2. Pay attention to the product flow, the distance to the counter edge and
convenience for the operator.
RS232 Connection
With the RS232 cable, this accessory device is intended to be supplied by a UL
Listed or CSA Certified Direct Plug-in Power Unit marked "Class 2", rated 5 V,
minimum 350 mA.
USB Connection
(if required)
With the USB cable, this accessory device is intended to be supplied by a UL
Listed or CSA Certified Power Unit marked "Class 2", or an LPS power source
which supplies power directly to the reader.
3
Summary of Contents for CATCHER D531 Series
Page 1: ...CATCHER D531 SERIES Quick Reference ...
Page 2: ......
