v
INTRODUCTION
The Datalogic DLL2020 is a high performance omni-directional scanner,
which provides optimal scanning conditions.
Together with its compact and ergonomic design, operator fatigue and
other discomforts are less than any competitive omni-directional scanner.
These characteristics make the DLL2020 especially suitable for
installation in small counters such as in drugstores, pharmacies,
department stores, tobacconists, kiosks, petrol stations, and
convenience stores.
The omni-directional scan field of the DLL2020 generates a scan pattern
of 16 lines, ensuring high performance scanning. Featuring an
unequalled scan rate of 800 scans per second, the DLL2020 is an
aggressive scanner.
Barcodes are read simply on presentation to the scanner window.
However, the ergonomic design of DLL2020 rubber sleeve, which fits
naturally in the hand, makes the unit easy to pick up when larger or
heavier products have to be scanned.
The scanner con be installed ‘free-standing’ on a counter surface using
its protective rubber sleeve or without the sleeve, flush or surface fixed to
check-out furniture, making for a very neat installation.
This manual contains three chapters and three appendices. The first
chapter describes the DLL2020 scanner, its general features as well as
the way in which it can be used. The precise instructions for installing the
scanner are listed in the second chapter. Default settings can be
changed using the bar code labels in chapter 3 "Configuration".
Appendix A shows the connector types of the scanner. Technical
specifications of the DLL2020 can be found in Appendix B. Refer to
Appendix C for troubleshooting if the scanner is not working properly.
