Getting Started
24
RFID Bluetooth® Pocket Reader DLRBT001
load VCP drivers for Windows based systems from
the Datalogic RFID Website, in the SW/FW section.
3.
Open the System properties: go to “Control Panel “>
“All Control Panel Items” > “System” and click on the
option “Device Manager”.
4.
After installing the driver, the reader is detected by
the PC (in the Device Manager window) as an emu-
lated serial port (VCP).
Once the connection is up, the USB Yellow LED turns on.
Now you can use the DL RFID Software Tool Controller
Application to control the reader under the
DLR-SW
pro-
file. The application could be downloaded from the Data-
logic website, at the DLR-BT001-XX web page. Check for
the latest version of this application, download and install
it. Refer to the manuals downloadable from the website
to complete the needed steps.
Cases N° 2 & 3: DLR_SW for Windows - activation finish
up
Both USB and Bluetooth
®
interfaces create a virtual COM
port (
VCP /SPP)
on the host PC that can be used to con-
nect to the reader by running a Windows type of the “
DL
RFID Software Tool Controller” Application.