Getting Started
Product Reference Guide
29
4.
As soon as the connection is established the Blue-
tooth® blue LED turns on.
5.
Launch a Text Editing App (or any other App accept-
ing a keyboard input).
6.
Start an inventory cycle by pressing the reader’s
trigger button.
7.
On the text editing window you will find the EPCs of
the detected tags:
Options List in the HID Profile
To enter the HID profile options, turn on the reader, the
display shows information on the currently active profile
(HID) and then the message "ready" informs you that the
reader is operating. Press quickly the power button to
enter the HID profile options:
•
FORMAT
•
DISPLAY
•
APPLEKB
FORMAT
In the HID profile you can set different EPC format, while
by using the DLR_SW profile it is not possible to change
the HEXADECIMAL EPC format.
•
HEX: the RFID EPC string (96 bits long) is displayed as
24 hex characters (4 bits per character).
•
ASCII: the RFID EPC string (96 bits long) is displayed
by 12 ASCII characters.
The currently active format is marked with an asterisk. By
default the EPC HID format is set to “HEX”.
To activate a different format, scroll the FORMAT options
by pressing quickly the trigger button until HEX or ASCII is
displayed. Hold down the trigger button for a few seconds,