DLR-BT001-XX Configuration of Main Menu & Aux Menu
Product Reference Guide
35
•
HID
: choose this option to select the keyboard emula-
tion protocol. For details on the use of the HID profile
please refer to
Options List in the HID Profile on page
29
.
•
BUFFER
: choose this option to select the stand-alone
mode. The reader stores EPC codes into the internal
memory when the communication links (Bluetooth®
or USB) are not available.
The DLR-SW and HID profiles require the presence of
a nearby host that controls the reader (pc, tablet),
while in the BUFFER profile the reader works in
stand-alone mode.
To return to the main menu, press the
power
button
quickly.
The currently active profile is marked with an
asterisk
.
You can activate only one profile at a time.
To activate an alternative profile, scroll the PROFILE
options by quickly pressing the
trigger
button, until the
desired profile is displayed. Hold down the
trigger
button
for a few seconds: the profile name will begin to flash.
Once activated, the device returns to the main menu.
When you turn on the reader, the display shows the cur-
rently active profile and then the message "ready" to
inform you that the reader is able to operate.
BEEP
Access the configuration menu as explained in
Introduc-
tion on page 33
. Press the
trigger
button quickly to scroll
the menu options.
The BEEP item is the second option of the menu. To select
it, hold down the
trigger
button.
The BEEP submenu options are the following:
•
PWRUP
: beep at the power on of the reader
•
PWRDOWN
: beep at the power off of the reader
•
SCANTAG
: beep at the identification of a tag
WARNING
Note that if the reader is in the HID profile
you must disconnect it from any connected
device before selecting another profile.
