DLR-BT001-XX Configuration of Main Menu & Aux Menu
Product Reference Guide
37
POWER
The POWER sub-menu allows to set the RF power level
emitted by the reader.
Note that, when the reader is configured under the DLR-
SW profile, the power could also be set by using the DL
RFID Software Tool Controller Application or the “
Set-
Power
” function of the library SDK (Software Development
Kits).
Access the configuration menu as explained in
Introduc-
tion on page 33
. Press the
trigger
button quickly to scroll
the menu options.
The POWER sub-menu is the fourth option of the menu.
To select it, hold down the
trigger
button.
The POWER sub-menu options are the following:
•
25 mW
•
50 mW
•
100 mW
•
200 mW
Press the
trigger
button quickly to scroll the POWER
options. To return to the main menu, press the
power
but-
ton quickly.
The currently active power is marked with an
asterisk
.
By default, the 200 mW power level is active.
You can activate only one power level at a time.
To activate a different power level, scroll the POWER
options by pressing quickly the
trigger
button until the
desired power level is displayed. Hold down the
trigger
button for a few seconds: the power level option will begin
to flash. Once activated, the device returns to the main
menu.
CLOCK
The reader does not consider date and time until the first
setting by the user.
To access the CLOCK option, turn off the device and then
turn it on again (power button).
To scroll the menu options, the trigger button press
quickly (hold down the trigger button within two seconds
to enter in the main menu).