General Information
2
DLR-TL001
General Information
Datalogic RFID DLR-TL001 is a low cost, semi-passive
UHF Logger TAG that allows to monitor temperature sen-
sitive products during transportation or storage. DLR-
TL001 is compliant to the EPC Class1 Gen2/ISO18000-6C
standards and it can be used with the Gen2 UHF RFID
readers on the market without any additional equipment.
Once configured using the RFID interface, the logger can
be activated by a simple manual interface that includes a
button (see
). The TAG will start to
monitor the life of a temperature sensitive product allow-
ing to identify problems occurred along the whole cold
chain in a fast and effective way.
The logger is configurable either in Continuous or Over-
Threshold logging modes and it allows to define up to 16
independent histogram bins for its full temperature
range. Each histogram permits to have different program-
mable sampling times. Temperature logging and alarms
generation can be enabled or disabled independently for
each histogram bin.
The TAG is also able to calculate the Mean Kinetic Tem-
perature and the remaining shelf life time and to generate
alarms in case these parameters exceed user defined
thresholds.
The tag can generate alarms for the following conditions:
•
The counter of a histogram bin exceeds the defined
threshold.
•
The Mean Kinetic Temperature value exceeds the
defined threshold.
•
The remaining Shelf life is less than the defined
threshold.
•
The logging memory is full.
•
The elapsed time from the start of the logging
exceeds the defined Estimated Time of Arrival (ETA).
NOTE
For more details on Registers, please refer to the
Product Reference Guide (PRG).
