background image

Datalogic S.r.l.

Via S. Vitalino, 13
40012 Calderara di Reno
Italy
Tel. +39 051 3147011
Fax +39 051 3147205

©2016-2017 Datalogic S.p.A. and/or its affiliates

An Unpublished Work - All rights reserved. No part of the
contents of this documentation or the procedures described
therein may be reproduced or transmitted in any form or by
any means without prior written permission of Datalogic
S.p.A. and/or its affiliates. Owners of Datalogic products are
hereby granted a non-exclusive, revocable license to
reproduce and transmit this documentation for the
purchaser's own internal business purposes. Purchaser shall
not remove or alter any proprietary notices, including
copyright notices, contained in this documentation and shall
ensure that all notices appear on any reproductions of the
documentation.  Should  future  revisions  of  this  manual  be
published, you can acquire printed versions by contacting your
Datalogic representative. 
Electronic versions may either be downloadable from the
Datalogic website (

www.datalogic.com

) or provided on

appropriate media. If you visit our website and would like to
make comments or suggestions about this or other Datalogic
publications, please let us know via the "Contact Datalogic"
page.

Disclaimer

Datalogic has taken reasonable measures to provide
information in this manual that is complete and accurate,
however, Datalogic reserves the right to change any
specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of 
Datalogic S.p.A. in many countries, including the U.S.A. and 
the E.U..
DLR-TL001 is a trademark of Datalogic S.p.A. and/or its affili-
ates. All other trademarks and brands are property of their 
respective owners.

.

See the Regulatory Addendum included with
your product for additional regulatory, safety
and legal information.

Summary of Contents for DLR-TL001

































Reviews: