INSTALLATION
4
DWS-SWITCH-MONO
System Wiring: OUT#3
Figure 6 - Terminal Block for Out#3
The terminal block for Out#3 (PWR-2400) is highlighted in the picture above. Use cables
3 X yy mm
2
, where "yy" is a value between 2.5 - 4 mm
2
.
Out#3 is protected by Fuse QF02, 16A gG.
System Wiring: OUT#4
Figure 7 - Terminal Block for Out#4
The terminal block for Out#4 (PWR-480B or PWR-240B or PWR-120) is highlighted in
the picture above. Use cables 3 X yy mm
2
, where "yy" is a value between 2.5 - 4 mm
2
.
Out#4 is protected by Fuse QF03, 4A gG.
CAUTION: Output cables can be max. 12 m long.
NOTE: When not used, keep the compression connectors sealed with their
appropriate plugs.
