Barcode Configuration | Code Collection
Reference Manual
95
Max Number of Different Characters
Enter a value from 0 to 5 in the field provided to define the maximum number of
different characters allowed to still consider a code as being included in another
one and therefore to be filtered.
If the number of different characters between the compared codes exceeds the
value of this parameter, the codes are considered as different and will not be
filtered (a multiple read of a different code occurs).
If the number of different characters between the compared codes is less than or
equal to the value of this parameter, the short code is considered as a sub-string of
the longer code and will be filtered (no multiple read occurs).
If Max Number of Different Characters = 2:
The code 123456 read once, is considered the same as the following codes read
multiple times: 133056, 123546, 123457 because there are two or less different
characters by position in the compared codes.
The code 123456 read once, is not considered the same as the following codes
read multiple times: 153246, 103057, 654321 because there are at least three
different characters by position in the compared codes.
Filter Out Low Height Codes
Select the check box to reveal the Minimum Readings Difference Between Scanners
field.
Background: This option was developed for the airports systems where there are
often tall bar height codes and low bar height codes with the same content
attached to baggage. Travelers will often remove the large, tall bar height code,
while leaving the smaller, low bar height codes attached to the bag. The next time
they travel they may have multiple low bar height codes on their baggage plus the
new tall bar height and low bar height codes for the new trip.
This option instructs the system to ignore low bar height codes, which are likely
read only once or twice, in favor of tall bar height codes, which will likely be read
multiple times.
This is used in tunnel applications where multiple barcodes are read and there is a
need to filter out one of the barcodes. If less than x number of scanners read the
barcode, then it will be considered a NOREAD for that code.
Minimum Readings Difference Between Scanners
Enter the minimum number of scanners that must read a barcode for it to be
considered a valid read.
Filter Out Single Readings
With the check box selected, if only 1 scanner reads a code it will be considered a
NOREAD.
Strip Filter
Select the check box to display the Strip Filter Settings options. This is a second
level filter that when enabled allows eliminating characters not managed by the
host.
Strip Filter Settings
Strip All Non Printable Chars
Select the check box to remove all non- printable ASCII characters from the code
(000-020 and 127).
Char(s) to be Stripped
Click
to activate the Text Entry Tool and enter specific characters to be stripped
from the code. Click Submit to save your text to the origin window text field, or
click Cancel to return to origin window without transferring text.
Summary of Contents for DX8210
