Datalogic DX8210 Reference Manual Download

Page: 151 / 300

Messaging | Message Builder

Reference Manual

139

Item Data Format

Select Decimal (ASCII), Hexadecimal (ASCII), Bitmap (ASCII), or Numeric (Binary)

from the drop-down list. This is only available when Package Related Item is

selected.

Package Related Item: Options

Item Alignment

Select None, Left, or Right from the drop-down list.

Item Alignment Length

Enter an Item Alignment Length in the field provided.

Item Alignment Filler

Click to activate the Text Entry Tool and create filler text. Click Submit to save your

text to the origin window text field, or click Cancel to return to origin window

without transferring text.

Item Data Size

Select Variable or a number of digits to use from the drop-down list.

Item Data Format

Select Decimal (ASCII), Hexadecimal (ASCII), Bitmap (ASCII), or Numeric (Binary)

from the drop-down list.
Item Scale Type (Units)Use Global Scale Type, Metric (mm), Imperial (0.1 in.) if

package related item is a measure or a weight.

3. When you have finished making changes, click Update All to save all pend-

ing changes, click Reset All to revert to all previously saved values, and click

Reset Page to revert to previous saved values on the current page.

Summary of Contents for DX8210













































































































































































































































































































Search results

Summary of Contents for DX8210

Reviews:

Related manuals for DX8210

Brands by name

Popular brands

Datalogic DX8210, Reference Manual

Search results

Summary of Contents for DX8210

Reviews:

Related manuals for DX8210

Brands by name

Popular brands