Datalogic Falcon 4410 Product Reference Manual Download

Page: 19 / 240

Backlight

Product Reference Guide

2-3

Figure 2-1. Backlight Control Panel & Brightness

4. On the

Auto-Off

tab, enable the desired option checkbox and select the

desired options from the pull-down lists (refer to

Figure 2-1

5. On the

Activation

tab, just tap the checkbox(es) to enable or disable

them (refer to

Figure 2-1

•

Set the backlight to turn on automatically when any key is pressed
or the touchscreen is tapped, either while on battery or external
power.

•

Turn on the backlight when the trigger is pulled.

•

Deselect Launch Control Panel from the Keyboard to turn off the
ability to open the

Backlight

control panel with a key sequence.

6. To exit and save your modifications, tap

on the command bar, or

press

<Enter>

on the keypad.

Using Auto-on while running from battery power will cause the battery pack to
discharge at a faster rate. The battery discharge rate decreases with a decrease in
backlight usage.

Summary of Contents for Falcon 4410

















































































































































































































































Search results

Summary of Contents for Falcon 4410

Reviews:

Related manuals for Falcon 4410

Brands by name

Popular brands

Datalogic Falcon 4410, Product Reference Manual

Search results

Summary of Contents for Falcon 4410

Reviews:

Related manuals for Falcon 4410

Brands by name

Popular brands