Datalogic Falcon 4410 Product Reference Manual Download

Page: 13 / 240

Product Reference Guide

1-1

Chapter 1

Batteries and Power

Overview

This section contains the following topics:

•

"Suspend Mode" starting on page

1-1

•

"Battery Warnings and Cautions" on page

1-2

•

"Battery Disposal" starting on page

1-4

Suspend Mode

The Falcon will go into a suspend or sleep mode when it is idle for a period of
time. This duration can be customized using the

Power

control panel (refer to

"Power Off Tab" on page

2-30

. Suspend mode works and looks just like you

have turned the unit off. Press

<Power>

to suspend (put to sleep) the Falcon.

Press

<Power>

again for the Falcon to resume its previous state.

Use the

Battery Power

control panel to set the idle duration and the initiation

of suspend mode. These features save battery power when the Falcon is not in
use. Refer to "Power Off Tab" on page

2-30

for more information.

Suspending

The following conditions will put the unit into suspend (sleep) mode:

1. When the unit is on, press

<Power>

for 0.5 second to initiate suspend

mode.

2. When the sleep timer expires, indicating that there has been no use

for a specified period of time.

3. A discharged battery pack.

Summary of Contents for Falcon 4410

















































































































































































































































Search results

Summary of Contents for Falcon 4410

Reviews:

Related manuals for Falcon 4410

Brands by name

Popular brands

Datalogic Falcon 4410, Product Reference Manual

Search results

Summary of Contents for Falcon 4410

Reviews:

Related manuals for Falcon 4410

Brands by name

Popular brands