References
296
Gryphon™ I GD44XX/GBT4400/GM440X
BT-Only Features
BT Pin Code
This option specifies the 4-character or 16-character pin code to be used
for authentication of the BT
link.
To set the pin code:
1.
Scan the
ENTER/EXIT PROGRAMMING MODE bar code to enter Program-
2.
Specify the desired pin code length (4 or 16) by scanning the appropri-
ate bar code in
3. Determine the desired characters. For example, D254 or
STOR12345678135M
4. Convert the characters to hexadecimal using the
on the
inside back cover of this manual.
5. Go to
and Scan the bar code: SET 4 CHAR PIN CODE or SET
16-CHAR PIN CODE.
6. Scan the appropriate alphanumeric characters from the keypad in
, representing the hexadecimal entries determined
in the steps above. You will hear a two-beep indication after the last
character.
If you make a mistake before the last character, scan the CANCEL bar code
to abort and not save the entry string. You can then start again at the
beginning.
7. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Program-
ming Mode.
Changing the pin code setting will unlink the devices. If the Automatic
Configuration Update is set to the default enabled setting, the devices
must only be relinked. If the Automatic Configuration Update is set to the
disabled setting, the Pin Code setting must also be updated in the Base
Station using Aladdin. After the Base Station has been updated, the
devices must be relinked.
Table 23. BT Pin Code Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
D254
STOR12345678135M
2
Convert the characters to
hexadecimal
44 32 35 34
53 54 4F 52 31 32 33 34 35 36 37 38 31 33 35 4D
3
Scan ENTER/EXIT PROGRAMMING MODE
4
Scan SET BT PIN CODE
5
Scan 8 or 32
Alphanumeric
Characters From
44323534
53544F5231323334353637383133354D
6
Scan ENTER/EXIT PROGRAMMING MODE
Summary of Contents for GBT4400BK
