manualshive.com logo in svg

Datalogic Gryphon BT4100, Product Reference Manual

The Datalogic Gryphon BT4100 is a high-performance barcode scanner that ensures precise and reliable scanning. For a detailed understanding of its features and functionalities, users can conveniently access the free Product Reference Manual. Download this comprehensive manual for your Gryphon BT4100 from 88.208.23.73:8080 and unlock the full potential of your scanner.

Share
Download
background image

Symbologies

Product Reference Guide

        

                   303

Set Length 2

This feature allows you to set one of the barcode lengths for the specified symbology. Length 2 
is the maximum label length if in 

Variable Length

 Mode, or the second fixed length if in 

Fixed 

Length

 Mode. See the page for the specific symbology for parameters.

The length that can be set varies depending on the symbology. A setting of 0 specifies to ignore 
this length (only one fixed length).

Follow these instructions to set this feature:

1. Determine the desired character length (from 1 to 50 — or 0 to ignore this length). Pad 

the number with leading zeroes to yield two digits. For example: 0 = 00, 5 = 05, 20 = 20, 
etc.

2. Go to the Set Length page for your selected symbology and scan the ENTER/EXIT PRO-

GRAMMING MODE barcode to enter Programming Mode.

3. Scan the barcode to SELECT LENGTH 2 SETTING for your selected symbology.

4. Scan the appropriate two digits from the keypad in 

Appendix D, Keypad

 that represent 

the length setting which was determined in the steps above. You will hear a two-beep indi-
cation after the last character.

If you make a mistake, before the last character scan the CANCEL barcode 
to abort and not save the entry string. You can then start again at the 
beginning.

5. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming 

Mode.

This completes the procedure.

Summary of Contents for Gryphon BT4100



















































































































































































































































































































































































Reviews:

No comments

Related manuals for Gryphon BT4100

American Dynamics 2083/08 Installation And Operation Instructions Manual preview
2083/08
Brand: American Dynamics Pages: 20
Dahua DHI-ASR2101A User Manual preview
DHI-ASR2101A
Brand: Dahua Pages: 24
LEGRAND Soliroc 0 778 71 Manual preview
Soliroc 0 778 71
Brand: LEGRAND Pages: 2
Datalogic Gryphon I GM440 Series Product Reference Manual preview
Gryphon I GM440 Series
Brand: Datalogic Pages: 350
SIIG US2278 Quick Installation Manual preview
US2278
Brand: SIIG Pages: 4
Obreey Pro 612 User Manual preview
Pro 612
Brand: Obreey Pages: 107
TSC TX200 Series User Manual preview
TX200 Series
Brand: TSC Pages: 73
Cypress WMR-3121 Quick Start Manual preview
WMR-3121
Brand: Cypress Pages: 2
RIOTEC OM7320 Installation Manual preview
OM7320
Brand: RIOTEC Pages: 2
Leuze electronic BCL 95 Operating Instructions Manual preview
BCL 95
Brand: Leuze electronic Pages: 61
Leuze electronic BCL 21 Technical Description preview
BCL 21
Brand: Leuze electronic Pages: 86
Sitecom MD-020 BE Full Manual preview
MD-020 BE
Brand: Sitecom Pages: 7
Omron FQ-CR Series Instruction Sheet preview
FQ-CR Series
Brand: Omron Pages: 2
Omron V680-CA1D User Manual preview
V680-CA1D
Brand: Omron Pages: 113
Obreey Pro 603 User Manual preview
Pro 603
Brand: Obreey Pages: 111
Califone Card Reader Owner'S Manual preview
Card Reader
Brand: Califone Pages: 4
Hama Premium Silver Operating Instruction preview
Premium Silver
Brand: Hama Pages: 12
Vauban Systems VERSO+ Series Technical Information preview
VERSO+ Series
Brand: Vauban Systems Pages: 17

Brands by name

Popular brands

Load more brands