Operating Modes
24
Gryphon™ I GD44XX
Pick Mode
Specifies the ability of the reader to decode labels only when
they are close to the center of the aiming pattern. Pick Mode
is a Decoding and Transmission process where bar codes that
are not within the configurable distance from the center of the
aiming pattern are not acknowledged or transmitted to the
host. It is active only while the scanner is in Trigger Single
mode. If the scanner switches to a different Read Mode, Pick
Mode is automatically disabled.
Multiple Label Reading
The reader offers a number of options for multiple label read-
ing. See the PRG or software configuration tool for descrip-
tions of these features and programming labels.
This feature is not compatible with Multiple Labels
Reading in a Volume. See the PRG for more infor-
mation.
ENTER/EXIT PROGRAMMING MODE
PIck Mode = Disable
Pick Mode = Enable
Summary of Contents for Gryphon I GD44 Series
Page 5: ...NOTES...
