Cleaning Procedure
Quick Reference Guide
33
Cleaning enclosure and window surfaces
1.
Moisten a soft cloth with a recommended clean-
ing solution. Be sure to apply the solution to
your cloth first. Wring excessive liquid from the
cloth.
2.
Use the cloth to wipe down the surface of the
unit. Use cotton swabs, lightly moistened, to
reach in corners and crevices.
3.
Minimize the amount of disinfectant applied to
the contacts.
4.
Use another clean dry cloth to remove any resi-
due of the cleaning agent and ensure the unit is
dry.
Cleaning electrical contact surfaces
1.
Clean the enclosure and window first, as
described above.
2.
Use a soft cloth moistened with any isopropyl
alcohol to clean the surface of the contact. Use
care not to leave any cloth residue.
3.
If needed, use a nylon bristled brush to remove
stubborn contamination. Additionally, a clean
pencil eraser can be rubbed on the handheld
contacts.
Summary of Contents for Gryphon I GD44XX
